| No. | Brand | U | L | G | T | a | w | H | C |
| 29440E M | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| MS-8-2RS P/6 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| RXLS-1 3/4 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 1414 M | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| N-207 M | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 24172-K30 M | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| D-15 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 6307-2RSNR | CONSOLIDATED BEARING | - | - | - | 844.55 mm | - | - | - | - |
| 210-ZZNR | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| FR-240/10 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 6309 NR C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 16016 P/6 | CONSOLIDATED BEARING | - | 419.1 mm | - | - | - | - | 257.175 mm | - |
| NJ-422 M C/4 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| NU-2206 C/4 | CONSOLIDATED BEARING | - | - | - | - | - | - | 144.463 mm | - |
| 6316 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 16010 P/6 | CONSOLIDATED BEARING | - | - | - | 479.425 mm | - | - | - | - |
| NA-4928 P/5 | CONSOLIDATED BEARING | - | - | M 24x2 | - | - | 30 mm | - | - |
| 23134E-KM C/3 | CONSOLIDATED BEARING | - | 387.35 mm | - | - | - | - | - | - |
| 6308-2RSNR | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 61808-2RS | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 1621-2RS | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| CONSOLIDATED BEARING NATV-10X Cam Follower and Track Roller - Yoke Type | s2 max.:17.8 mm; Basic static load rating C0:640 kN; G1:13 mm; Operating clearance factor k2:0.142; da min.:124.6 mm; s1 max.:17.8 mm; B:60 mm; Basic dynamic load rating C:430 kN; r1,2 min.:2 mm; D1 ≈:164 mm; |
| 1.969 Inch | 50 Millimeter x 2.677 Inch | 68 Millimeter x 0.787 Inch | 20 Millimeter CONSOLIDATED BEARING NAO-50 X 68 X 20 NAF Needle Non Thrust Roller Bearings | Max. speed for PosiTrac Plus seal:1950 r/min; A2:173.037 mm; Initial grease fill:181.44 g; Mass pillow block:33.9 kg; Labyrinth ring:2 x LOR 184; P150°:32 kN; ba:48.419 mm; H1:114.3 mm; A1:111.125 mm; Cap bolt recommended tightening torque:515.2 N·m; Size (mm):1.969 Inch | 50 Millimeter x 2.677 Inch | 68 Millimeter x 0.787 Inch | 20 Millimeter ; |
| 1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.063 Inch | 27 Millimeter CONSOLIDATED BEARING 6310 T P/5 Precision Ball Bearings | Oil Speed Rating Open/Shielded n2:14000 rpm; Basic Static Radial Load Rating Co:6800 N; B:10.00 mm; Fillet Radius ra:0.64 mm; Accessories:Two Shields; D:55.0000 mm; Sealed Speed Rating n3:7500 rpm; Basic Dynamic Radial Load Rating C:9560 N; Grease Speed Rating Open/Shielded n1:11000 rpm; d:35.000 mm; Size (mm):1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.063 Inch | 27 Millimeter ; |
| CONSOLIDATED BEARING 61909-ZZ Single Row Ball Bearings | Fatigue load limit Pu:0.129 kN; D2:34.15 mm; Preload class A GA:35 N; Calculation factor e:0.68; Calculation factor (back-to-back, face-to-face) Y2:1.41; r1,2 min.:0.3 mm; Static axial stiffness, preload class D:125 N/µm; Basic static load rating C0:3.05 kN; B:9 mm; da min.:22 mm; |
| CONSOLIDATED BEARING 61812 Single Row Ball Bearings | G:Tr 800x7; Associated eyebolt for handling:M 20; Mass lock nut:187 kg; d2:863 mm; B5:139 mm; h:34 mm; B3:20 mm; b:60 mm; d3:1000 mm; d1:925 mm; |
| 0.75 Inch | 19.05 Millimeter x 2 Inch | 50.8 Millimeter x 0.688 Inch | 17.475 Millimeter CONSOLIDATED BEARING MS-8-AC Angular Contact Ball Bearings | r1,2 min.:0.6 mm; Basic dynamic load rating C:10.8 kN; Thread grub screw G2:1/4-28 UNF; Fatigue load limit Pu:0.28 kN; s1:18.3 mm; B4:4.5 mm; C:14 mm; Limiting speed1):5000 r/min; d:19.05 mm; Basic static load rating C0:6.55 kN; Size (mm):0.75 Inch | 19.05 Millimeter x 2 Inch | 50.8 Millimeter x 0.688 Inch | 17.475 Millimeter ; |
| CONSOLIDATED BEARING 1407 M Self Aligning Ball Bearings | Basic Dynamic Radial Load Rating C:95600 N; Basic Static Radial Load Rating Co:88000 N; Oil Speed Rating n2:4300 rpm; Accessories:One Seal & Snap-Ring; B:41.30 mm; Sealed Speed Rating n3:3200 rpm; Grease Speed Rating n1:3200 rpm; D:130.0000 mm; d:75.000 mm; Fillet Radius ra:1.50 mm; |
| 3.346 Inch | 85 Millimeter x 4.528 Inch | 115 Millimeter x 1.181 Inch | 30 Millimeter CONSOLIDATED BEARING NAO-85 X 115 X 30 Needle Non Thrust Roller Bearings | Width A:1.6250 in; Insert Bearing IB:Stainless Steel; Dimension H:1.1563 in; Shaft Diameter D:1 3/8 in; Dimension C:3.5000 in; Dimension D2:3.0000 in; Dimension L:4.8125 in; Dimension G:0.3750 in; Dimension N:0.7813 in; Basic Dynamic Radial Load Rating:4560 lbf; Size (mm):3.346 Inch | 85 Millimeter x 4.528 Inch | 115 Millimeter x 1.181 Inch | 30 Millimeter ; |
| CONSOLIDATED BEARING 16036 M Single Row Ball Bearings | Limiting speed:2200 r/min; Basic static load rating C0:800 kN; D:170 mm; rb max.:1 mm; Calculation factor kr:0.5; Reference speed:1800 r/min; Da max.:161 mm; D1 ≈:148.5 mm; B:80 mm; b1:6 mm; |
| CONSOLIDATED BEARING 16002-ZZ Single Row Ball Bearings | Initial grease fill:141.75 g; A1:98.425 mm; R2:27.781 mm; Taconite seal:TER 187; J min.:263.525 mm; Cap bolt:1/2-13 UNC; Bearing:22218 EK; P120°:53.4 kN; PG:1/8 NPT; J max.:295.275 mm; |
| CONSOLIDATED BEARING 16005-ZZ Single Row Ball Bearings | Ca:75.616 mm; Bearing:23030 CCK/W33; N1:25.4 mm; Cap bolt recommended tightening torque:1220 N·m; h:56.356 mm; PG:1/4 NPT; P150°:68.1 kN; Da:225.001 mm; Stabilizing ring:2 x SR-0-21; Cap bolt:2 x 1-8 UNC; |
| CONSOLIDATED BEARING 6315-Z C/4 Single Row Ball Bearings | Basic Dynamic Radial Load Rating C:265000 N; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:335000 N; d:170.000 mm; Oil Speed Rating n2:2200 rpm; D:310.0000 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:1600 rpm; B:52.00 mm; |
| 10.5 Inch | 266.7 Millimeter x 14 Inch | 355.6 Millimeter x 1.75 Inch | 44.45 Millimeter CONSOLIDATED BEARING RXLS-10 1/2 Cylindrical Roller Bearings | d:80.000 mm; Basic Static Radial Load Rating Co:86500 N; Oil Speed Rating Open/Shielded n2:4500 rpm; Sealed Speed Rating n3:2600 rpm; Basic Dynamic Radial Load Rating C:124000 N; Grease Speed Rating Open/Shielded n1:3800 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4500 rpm; Accessories:Shield & Seal; Grease Speed Rating n1:3800 rpm; Size (mm):10.5 Inch | 266.7 Millimeter x 14 Inch | 355.6 Millimeter x 1.75 Inch | 44.45 Millimeter ; |
| CONSOLIDATED BEARING SAFS-232 Mounted Units & Inserts | P120°:85.9 kN; N1:28.575 mm; Cap bolt:4 x 3/4-10 UNC; P150°:78.3 kN; H1:169.875 mm; RG:3/4 NPT; Initial grease fill:793.8 g; Eye bolt:2 x 3/8-16 UNC; PG:1/4 NPT; Ca:89.789 mm; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.22 Inch | 31 Millimeter CONSOLIDATED BEARING QJ-312 NR Angular Contact Ball Bearings | R2:26.988 mm; J max.:320.675 mm; Cap bolt recommended tightening torque:515.2 N·m; Da:170 mm; Taconite seal:TER 45; Max. speed for Taconite seal:1150 r/min; P60°:85.9 kN; Initial grease fill:181.44 g; P120°:32 kN; Cap bolt:2 x 3/4-10 UNC; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.22 Inch | 31 Millimeter ; |
| CONSOLIDATED BEARING 6011 Single Row Ball Bearings | Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:58500 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:15000 rpm; D:100.0000 mm; Basic Static Radial Load Rating Co:40500 N; Oil Speed Rating n2:22000 rpm; B:25.00 mm; d:45.000 mm; |
3.937 Inch | 100 Millimeter x 4.724 Inch | 120 Millimeter x 1.417 Inch | 36 Millimeter CONSOLIDATED BEARING NK-100/36 P/5 Needle Non Thrust Roller Bearings Video